Safety Limiter PRO 1m. Available in black color made of impact-resistant PE high quality. The upper part made from white material. White part improves the visibility. Main limitation is resistant to weathering, and thus can use it in the winter at the negative. It is also UV-stabilized which results in that the sun’s rays do not affect the color of delimiters. The wall thickness is 4mm limiter
Safety Limiter PRO 1m – is a section with dimensions of 9 cm x 9 cm. It was designed by the company Azetx, that it can be combined with successive elements using an internal connector .
Safety Limiter PRO 1m -can be combined in a very simple way with the upper dam , which must be installed in some areas of the track where there are often collisions and tumbling remote-controlled models . In the case of construction of the track, outside the drill holes in the substrate having a diameter of 20mm and a stop secured by fixing pins with a diameter of 15mm .
The track construction RC Racing is equipped with accessories that enable flexible configuration and construction of the track. This is enabled by elastic elements , which can be used as a simple and flexible element . Each flexible element can also be fitted with an upper barrier or attached to the substrate using PE rods .
In addition, the track can be fitted in the end with fenders, switches connectors or solid tees.
Already racing RC Racing cars will not be able to break through the protective barrier . Each bumper is equipped with a Velcro fastening for a single piece liner. Velcro is attached to the base on both sides of the stop in order to prevent a shift shock stops during the race.
Wedge itself is very light in the transport and storage friendly . You do not need to build and store heavy wooden tracks that are not weatherproof .
The weight of 1m main limiter is 1.2 kg.
The maximum length of sections offered for sale is 2m.
System to build the track RC Racing invented and claimed by Azetx has been reported as industrial design
– PROHIBITION ON COPYING –